+91 96015 49788
shivshaktiss4@gmail.com
+91 96015 49788 shivshaktiss4@gmail.com
| MODEL | Input | Output | |||||
|---|---|---|---|---|---|---|---|
| NO. | Type of SSR | Voltage | Current | Voltage | Current Amp at 20ºC | Current Amp With HeatSink 55ºC | |
| 1 | SSR-SS4- DD 55 50 00 | 4-32VDC | 4-16mA | 5-55VDC | 50Amp DC | 35Amp DC | |
| 2 | SSR-SS4- DD 55 100 00 | 4-32VDC | 4-16mA | 5-55VDC | 100Amp DC | 70Amp DC | |
| 3 | SSR-SS4- DD 200 15 00 | 4-32VDC | 4-16mA | 5-200VDC | 15Amp DC | 8Amp DC | |
| 4 | SSR-SS4- DD 200 25 00 | 4-32VDC | 4-16mA | 5-200VDC | 25Amp DC | 16Amp DC | |
| 5 | SSR-SS4- DD 500 07 00 | 4-32VDC | 4-16mA | 5-500VDC | 7Amp DC | 4Amp DC | |
| 6 | SSR-SS4- DD 500 14 00 | 4-32VDC | 4-16mA | 5-500VDC | 14Amp DC | 8Amp DC | |
| 7 | SSR-SS4-DD 100 08 00 | 4-32VDC | 4-16mA | 5-100VDC | 8Amp DC | 3Amp DC | |
| 8 | SSR-SS4- DD 100 04 00 | 4-32VDC | 4-16mA | 5-100VDC | 4Amp DC | 2Amp DC | |
| 9 | SSR-SS4- DD 200 08 00 | 4-32VDC | 4-16mA | 5-200VDC | 8Amp DC | 4Amp DC | |
| 10 | SSR-SS4- DD 500 04 00 | 4-32VDC | 4-16mA | 5-500VDC | 4Amp DC | 2Amp DC | |
| Input Technical Data | |
|---|---|
| Input Control Supply Voltage | 4-32VDC |
| Input Control Supply Current | 4-16mA |
| Input Max.Impedance (Ohm) | 1.5k Ω |
| Output Technical Data | ||||||
|---|---|---|---|---|---|---|
| Unit | SSR-SS4- MODEL | 07 MODLE | 08 MODEL | |||
| Continuous Drain Current at 20ºC with Heat sink | Amp | 50/100/15/25/7/14 | 8Amp | 4/8/4Amp | ||
| Safe continuous rating Id at 55ºC with Heat Sink | Amp | 35/70/8/16/4/8 | 3Amp | 2/4/2Amp | ||
| Drain-to-source Break Down Voltage Vdss(BR) | VDC | 55/200/500 | 100 | 100/200 | ||
| Minimum Holding Current | mA | 20/40 | 3 | 20/40 | ||
| Turn ON Delay Time Td-ON | mS | 2.4 | 2.4 | 2.4 | ||
| Turn OFF Delay Time Td-OFF | mS | 2.4 | 2.4 | 2.4 | ||
| Isolation Voltage | KVA | 2.5 | 1.5 | 2.5 | ||
| Square Wave Output | Hz | 100 | 100 | 100 | ||
| DC TO DC POWER MOSFET |
|---|
| Input-Output-Body Isolation 2.5kVA |
| Input Green LED Indication / Output Reveres LED Indication |
| Turn ON/OFF Time Min.2.4 mill Second |
| Output to body 4kV Isolation |
| Across the Load,Back EMF Diode required for inductive Load |
| Switching Speeds are Inherently Faster. |
| Heatsink + Dinrail Mounting (35mm) |
| Reverse polarity protection on Input Side |
| Output N/O configuration |
| Application |
|---|
| Solenoid Valve Switching |
| PLC Interface |
| DC Clutch/Brake Switching |
| DC Motor Switching |
| Battery Power Switching |
| High Speed DC Switching |
| Magnetic Brake Switching |
| Automobile Vehicle Switching |
| DC Motor Forward/Reversed Switching |
